Rayon Vent & Ingot Molds, Tools Misc.

Product Summary

Cast Iron Ingot Mold for aluminum & Bronze.

Sizes Available:

27”X5” X 4 (for Aluminum)

10” X 3” X 2.5” (for Bronze).

Product Summary

RAYON VENT (VENT ROPE)

Product Summary

GXR-A BLOW GUN Functional safety ports are designed to aspirate, increasing the discharge volume by drawing in ambient air. Gun is lightweight for operating comfort, and corrosion resistant.

Inquire about the 12” and 25” nylon recoil hoses for the blow guns and air operated tools also.

Supplier of all Foundry needs

9Tel 978-649-0112

Fax 978-649-0114

Malcolm G. Stevens, Inc

Also Available:

 

                 Aluminum Notch Bar Ingot Molds

                

                 Alloyed Iron Aluminum Molds

 

                 Cast Iron or Ductile Iron Aluminum Sow Molds.

Dynaswivels Never struggle with an air hose again. The Dynaswivel is a universal joint that connects portable air tools to an air line. It swivels 360º at tow locations allowing an air hose to drop straight to the floor no matter how you hold the tool. This joint has male pipe threads that screws directly into most air tools and accepts male pipe thread hose fittings or standard quick change adapters.

SIZES

# 95460, 1/4 NPT Thread up to 25 CFM air flow range

# 95461, 3/8 NPT thread up to 26-45 CFM air flow range

# 95462, 1/2 NPT thread up 46-65 CFM air flow range.

Product Summary

STAINLESS STEEL MOLDERS TOOLS

All Molders Tools can be specified to meet your needs or all sizes below are available:

 

# 10 Square Trowel 1 1/4 X 5, 1 1/2 X 6, 2 X 7

# 12 Slick & Oval Spoon 3/4, 1, 1/4, 1 1/2

# 18 Slick & Square Spoon 3/4 ,1, 1/4, 1 1/2

# 80 Lifter 3/4-14, 1/2-16, 3/4-18, 1-20

# 90 Square & Square Spoon 3/4, 1, 11/4, 1 1/2

# 20 Finishing Trowel 1 1/4 X 5, 1 1/4X 6, 1 1/2X6, 1 1/2X 7, 2 X 7

# 24 Spoon & Gate Cutter 1, 1 1/4, 1 1/2

# 13 Slick & Taper 1”

# 19 Slick & Square 3/4, 1, 1/4, 1 1/2

# 85 Bench Lifter 1/2, 3/4, 1

 

The following are available in 1” only # 32 Taper & Spoon, # 38 Taper Square & Spoon, # 39 Taper & Square, # 72 Heart & Spoon and a # 73 Heart & Taper.

PERMOPLAST MOLDING CLAY   

Product Summary

Permoplast Molding Clay is a non-toxic modeling clay, which is sold in 5 lb Boxes (twenty 1/4 lb sticks)

Since 1919, Permoplast has remained the standard for premium, non hardening modeling clay. Its superior formula is easy to work with, stays soft and pliable when stored in a plastic bag, and can be used over and over.

# 90078F, X -30 Cream colored modeling clay is a stock item in Tyngsboro, MA. And can be shipped U.P.S. Upon receipt of order.

Flask & Bushings 

Product Summary

Flask Pins & Bushings Standard & custom machined, range up to 4-1.4: diameter in rounds-up to 3” in hex. Standard steel Flask pins, hook loose pins, self centering loose pins, hardened closing pins, round & elongated bushings, threaded hexagon or square flask & pattern plate pins.

All Flask pins are made from high quality cold finished steel which normally runs. 001” ti .002” undersized. Threaded pins are furnished complete with nut.

When standard sizes are not suitable for your needs, simply submit your requirements (print or samples) and our manufacturer will make according to your specifications.

 

CAST IRON TAP OUT CONES ( Cast Iron Stopper)

 

Stops the flow of molten metal at the furnace tap hole. Non Ferrous applications.

 

 

 

                                                                                                                       # 9001C.I. Cone, (drilled & tapped) 2 1/2

                                                                                                                       B.O.D X 6 1/2 H X 3/4 Nose

 

                                                                                                                       Style “A” C.I. Cone ,(drilled & tapped)

                                                                                                                       3” B.O.D. X 8 1/2 H X 1 Nose

 

                                                                                    

                                                                

 

                                                                

                                                   

                                                   

                                                        # 9001

                                                                                                                                                            Style “A”                                   

             Threaded

Tungsten Carbide Core Files

Product Summary

8” X 1/2 “ X 1/16” FLAT

8” X 1/2” X 1/8” FLAT

8” X 1/4” X 1/16” FLAT

8 x 1/8 “ ROUND

12” X 1” X 1/8” FLAT

 

Files are sold in 2 price brackets. 1 to 23 pieces or 24 pieces and up. Sizes may be combined for max bracket pricing.

Vibrators - Turbine & Piston

Several brands of vibrators in stock. The following accessories are also available.

· Connectors

· Filters, Regulators & Lubricants

· Hoses & Fittings

· Mounting channels

· Rail car brackets

· Values

Please call today so we may assist you in finding the correct type of vibrator you are looking for.

· Air Piston (Pneumatic) Vibrator

· Single impacters

· Miniature air piston vibrators

· Lubrication free coated air pistons Vibrator

· Ball Vibrators

· Rotary electric vibrator

· Mounting vibrators