|
Thermtronix Furnaces (model numbers) |
Malcolm G. Stevens, Inc |
|
Supplier of all Foundry needs |
|
9Tel 978-649-0112 |
|
Fax 978-649-0114 |
|
NOTE: All Furnaces available in Steel Frame Box or Rolled Steel Shell models. * Available in Low-Profile only ** Available in Low-Profile and Standard height § Available in Standard height only † Lower power ratings available on all furnaces for holding operations, other voltages ± Melt rate will vary with type of operation (i.e. tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed, and max power. |
|
SF & RS SERIES MODEL NUMBERS, PLEASE CALL US IF YOU NEED ADDITIONAL INFORMATION |
|
TF-SERIES MODEL NUMBERS, PLEASE CALL US IF YOU NEED ADDITIONAL INFORMATION |
|
Malcolm G. Stevens, Inc 12 Progress Ave, Tyngsboro, MA 01879 Tel 978-649-0112 Fax 978-649-0114 E-mail: BillyS@mgstevens.com |
|
Request a quote on line or call us at: |
|
TL-SERIES MODEL NUMBERS, PLEASE CALL US IF YOU NEED ADDITIONAL INFORMATION |
|
GT-SERIES MODEL NUMBERS, PLEASE CALL US IF YOU NEED ADDITIONAL INFORMATION |
|
* Melt Rate will vary with type of operation (i.e. tap and charge or batch melt) Melt rates assume hot furnace, clean crucible dense charge, lid closed, and maximum power. ** Other voltages and power ratings available-consult factory. |
|
GS-SERIES MODEL NUMBERS, PLEASE CALL US IF YOU NEED ADDITIONAL INFORMATION |
|
* Model Number Equals Capacity in Pounds of Aluminum. ** Most furnaces available for operation with single phase 120 volt or 240 volt service and three phase 380 volt and 575 volt 50 Hertz service-consult Malcolm G. Stevens for details. *** melt rate will vary with type of operation (i.e. Tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed and maximum power. |
|
* Model Number Equals Capacity in Pounds of Aluminum. ** Most furnaces available for operation with single phase 120 volt or 240 volt service and three phase 380 volt and 575 volt 50 Hertz service-consult Malcolm G. Stevens for details. *** melt rate will vary with type of operation (i.e. Tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed and maximum power. |
|
* Melt rate will vary with type of operation (i.e. tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed, and maximum power. ** Other voltages and power ratings available- consult Malcolm G. Stevens. |
|
SF/RS Series Model No. |
Capacity LB/KG |
Power Rating |
Power input vac † 3 Phase 60/50 Hz/ Volts-AMPS |
Melt Rate ± - 1300 F Aluminum - (700 C0) |
|
250 * |
250/LB (115 KG) |
25KW |
480/240-30/60 |
130/100LB/HOUR (60/45) |
|
350 * |
350/LB (160 KG) |
50KW |
480/240-60/120 |
265/200 LB/ HOUR (120/90) |
|
500 * |
500/lb (230 KG) |
50KW |
480/240-60/120 |
265/200 LB/HOUR (120/90) |
|
650 ** |
650/LB (300 KG) |
75KS |
480/240-90/180 |
385/300 LB/HOUR (180/135) |
|
900 ** |
900/LB (400 KG) |
75KW |
480/240-90/180 |
385/300 LB/HOUR (180/135) |
|
1200** |
1200/LB (550 KG) |
100KW |
480/240-120/240 |
525/400 LB/ HOUR (235/180) |
|
1500 ** |
1500/LB (700/KG) |
100KW |
480/240-120/240 |
525/400 LB/ HOUR (235/180) |
|
2000 § |
2000/LB (900/KG) |
100KW |
480/240-150/300 |
650/500 LB/ HOUR (290/225) |
|
2300 § |
2300/LB (1050 KG) |
125KW |
480/240-150/300 |
650/500 LB/ HOUR (290/225) |
|
2500 § |
2500/LB (1150 KG) |
125KW |
480/240-150/300 |
650/500 LB/ HOUR (290/225) |
|
3000 ± |
3000/LB (1370/KG) |
125KW |
480/240-150/300 |
650/500 LB/ HOUR (290/225) |
|
|
|
|
|
|
|
TF-Series Series Model No. |
Capacity LB/KG |
Power Rating** |
Power input vac † 3 Phase 60/50 Hz/ Volts-AMPS |
AL. Melt Rate* LB=1300F KG=700C |
|
TF-400 |
400LB 180KG |
50 KW |
480/240-60/120 |
265/200 LB/HR 120/90 KG/HR |
|
TF-600 |
600 LB 270 KG |
50 KW |
480/240-60/120 |
265/200 LB/HR 120/90 KG/HR |
|
TF-800 |
800 LB 360 KG |
75 KW |
480/240-90/180 |
395/300 LB/HR 180/135 KG/HR |
|
TF-1000 |
1000 LB 450 KG |
75 KW |
480/240-90/180 |
395/300 LB/HR 180/135 KG/HR |
|
TF-1200 |
1200 LB 550 KG |
100 KW |
480/240-120/240 |
525/400 LB/HR 235/180 KG/HR |
|
TF-1500 |
1500 LB 700 KG |
100 KW |
480/240-120/240 |
525/400 LB/HR 235/180 KG/HR |
|
TF-2000 |
2000 LB 900 KG |
125 KW |
480/240-150/300 |
650/500 LB/HR 290/225 KG/HR |
|
TF-2500 |
2500 LB 1150 KG |
125 KW |
480/240-150/300 |
650/500 LB/HR 290/225 KG/HR |
|
TF-3000 |
3000 LB 1370 KG |
125 KW |
480/240-150/300 |
650/500 LB/HR 290/225 KG/HR |
|
Model No Electric Gas. |
Capacity LB/KG |
Power Rating Electric Gas |
Melt Rate * LB/HR Electric Gas |
Melt Rate * KG/HR Electric Gas |
|
TL- 400 GL-400 |
400LB 180KG |
50 KW 750 SCFH |
265/200 LB/HR 200/130 LB/HR |
120/90 KG/HR 90/60 KG/HR |
|
TL-600 GL-600 |
600 LB 270 KG |
50 KW 750 SCFH |
265/200 LB/HR 300/200 LB/HR |
120/90 KG/HR 135/90 KH/HR |
|
TL-800 GL-800 |
800 LB 360 KG |
75 KW 1500 SCFH |
395/300 LB/HR 400/270 LB/HR |
180/135 KG/HR 180/120 KG/HR |
|
TL-1000 GL-1000 |
1000 LB 450 KG |
75 KW 1500 SCFH |
395/300 LB/HR 500/350 LB/HR |
180/135 KG/HR 225/160 KG/HR |
|
TL-1200 GL-1200 |
1200 LB 550 KG |
100 KW 1750 SCFH |
525/400 LB/HR 600/400 LB/HR |
235/180 KG/HR 270/180 KG/HR |
|
TL-1500 GL-1500 |
1500 LB 700 KG |
100 KW 2000 SCFH |
525/400 LB/HR 750/500 LB/HR |
235/180 KG/HR 340/225 KG/HR |
|
TL-2000 GL-2000 |
2000 LB 900 KG |
125 KW 2500 SCFH |
650/500 LB/HR 1000/665 LB/HR |
290/225 KG/HR 450/300 KG/HR |
|
TL-2500 GL-2500 |
2500 LB 1150 KG |
125 KW 2500 SCFH |
650/500 LB/HR 1000/665 LB/HR |
290/225 KG/HR 450/300 KG/HR |
|
TL-3000 GL-3000 |
3000 LB 1370 KG |
125 KW 2500 SCFH |
650/500 LB/HR 1000/665 LB/HR |
290/225 KG/HR 450/300 KG/HR |
|
GT-Series Model No. * Lbs./Al Capacity |
Electrical Service **3 Phase 60/50 HZ Volts-Amps |
Natural Gas Service Min. Conn. Load 15” - 28” W/1.5 S.F. |
Melt Rate Lbs. Hr *** (KGS/HR) Aluminum 1300F (700C) |
Approximate Shipping Weight Lbs. (KGS) |
|
GT-400 |
240/480 10/5 |
500-SCFH |
130/200 LBS./ HR. (60/90KGS) |
4740 LBS (2150) |
|
GT-600 |
240/480 10/5 |
750-SCFH |
200/300/LBS. HR.(90/135 KGS) |
5600 LBS (2540) |
|
GT-800 |
240/480 14/7 |
1100-SCFH |
270/400 LBS. HR. (120/180 KGS) |
6260 LBS (2840) |
|
GT-900 |
240/480 14/7 |
1300-SCFH |
300/450 LBS. HR.(135/205 KGS) |
6680 LBS (3030) |
|
GT-1000 |
240/480 14/7 |
1500-SCFH |
350/500 LBS. HR.(160/225/KGS) |
7050 LBS (3200) |
|
GT-1200 |
240/480 18/9 |
1750-SCFH |
400/600 LBS HR. (180/270 KGS) |
7400 LBS (3350) |
|
GT-1500 |
240/480 18/9 |
2000-SCFH |
500/750 LBS HR.(300/450 KGS) |
8090 LBS (3670) |
|
GT-2000 |
240/480 18/9 |
2500-SCFH |
665/1000 LBS. HR. (300/450 KGS) |
11500 LBS (5220) |
|
GT-3000 |