Thermotronix
SF & RS Series Model Numbers
Reduces hydrogen porosity, inclusions, and metal contamination. The undisturbed bath with limited surface area and the elimination of combustion by products greatly reduce dross formation assuring metal loss of less than 1% Degassing time and expanse are dramatically reduced and costly exhaust systems eliminated. Solid state power control assures max melting power.
| SF/RS
Series Model No. |
Capacity
LB/KG |
Power Rating |
Power input vac †
3 Phase 60/50 Hz/
Volts-AMPS |
Melt Rate ± - 1300 F
Aluminum - (700 C0) |
| 250 * |
250/LB
(115 KG) |
25KW |
480/240-30/60 |
130/100LB/HOUR
(60/45) |
| 350 * |
350/LB
(160 KG) |
50KW |
480/240-60/120 |
265/200 LB/ HOUR
(120/90) |
| 500 * |
500/lb
(230 KG) |
50KW |
480/240-60/120 |
265/200 LB/HOUR
(120/90) |
| 650 ** |
650/LB
(300 KG) |
75KS |
480/240-90/180 |
385/300 LB/HOUR
(180/135) |
| 900 ** |
900/LB
(400 KG) |
75KW |
480/240-90/180 |
385/300 LB/HOUR
(180/135) |
| 1200** |
1200/LB
(550 KG) |
100KW |
480/240-120/240 |
525/400 LB/ HOUR
(235/180) |
| 1500 ** |
1500/LB
(700/KG) |
100KW |
480/240-120/240 |
525/400 LB/ HOUR
(235/180) |
| 2000 § |
2000/LB
(900/KG) |
100KW |
480/240-150/300 |
650/500 LB/ HOUR
(290/225) |
| 2300 § |
2300/LB
(1050 KG) |
125KW |
480/240-150/300 |
650/500 LB/ HOUR
(290/225) |
| 2500 § |
2500/LB
(1150 KG) |
125KW |
480/240-150/300 |
650/500 LB/ HOUR
(290/225) |
| 3000 ± |
3000/LB
(1370/KG) |
125KW |
480/240-150/300 |
650/500 LB/ HOUR
(290/225) |
NOTE: All Furnaces available in Steel Frame Box or Rolled Steel Shell models.
* Available in Low-Profile only
** Available in Low-Profile and Standard height
§ Available in Standard height only
† Lower power ratings available on all furnaces for holding operations, other voltages
± Melt rate will vary with type of operation (i.e. tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed, and max power.
TF-Series Model Numbers
Reduces hydrogen porosity, inclusions, and metal contamination. The undisturbed bath with limited surface area and the elimination of combustion by products greatly reduce dross formation assuring metal loss of less than 1% Degassing time and expanse are dramatically reduced and costly exhaust systems eliminated. Solid state power control assures max melting power. Shipped ready for operation, Completely tested.
| TF-Series
Series Model No. |
Capacity
LB/KG |
Power
Rating** |
Power input vac †
3 Phase 60/50 Hz/
Volts-AMPS |
AL. Melt Rate*
LB=1300F
KG=700C |
| TF-400 |
400LB
180KG |
50 KW |
480/240-60/120 |
265/200 LB/HR
120/90 KG/HR |
| TF-600 |
600 LB
270 KG |
50 KW |
480/240-60/120 |
265/200 LB/HR
120/90 KG/HR |
| TF-800 |
800 LB
360 KG |
75 KW |
480/240-90/180 |
395/300 LB/HR
180/135 KG/HR |
| TF-1000 |
1000 LB
450 KG |
75 KW |
480/240-90/180 |
395/300 LB/HR
180/135 KG/HR |
| TF-1200 |
1200 LB
550 KG |
100 KW |
480/240-120/240 |
525/400 LB/HR
235/180 KG/HR |
| TF-1500 |
1500 LB
700 KG |
100 KW |
480/240-120/240 |
525/400 LB/HR
235/180 KG/HR |
| TF-2000 |
2000 LB
900 KG |
125 KW |
480/240-150/300 |
650/500 LB/HR
290/225 KG/HR |
| TF-2500 |
2500 LB
1150 KG |
125 KW |
480/240-150/300 |
650/500 LB/HR
290/225 KG/HR |
| TF-3000 |
3000 LB
1370 KG |
125 KW |
480/240-150/300 |
650/500 LB/HR |
*Melt Rate will vary with type of operation (i.e. tap and charge or batch melt)
Melt rates assume hot furnace, clean crucible dense charge, lid closed, and maximum power.
** Other voltages and power ratings available-consult factory.
TL-Series Model Numbers
TL-Series Electric Melting Transport Ladle
Aluminum melting Transport Ladles are available for use with electric and gas energy sources. Product combines the features of a transfer ladle with the full melting capability of our standard furnaces in a single unit. Melt, Hold and pour quality aluminum directly with no intermediate transfer, Power control assures maximum melting power and efficiency utilizing only the exact amount of energy required to achieve and maintain precise temperature control. No maintenance prone on-off mechanical contractors or high-low burner control.
| Model No
Electric
Gas. |
Capacity
LB/KG |
Power Rating
Electric
Gas |
Melt Rate * LB/HR
Electric
Gas |
Melt Rate * KG/HR
Electric
Gas |
| TL- 400
GL-400 |
400LB
180KG |
50 KW
750 SCFH |
265/200 LB/HR
200/130 LB/HR |
120/90 KG/HR
;90/60 KG/HR |
| TL-600
GL-600 |
600 LB
270 KG |
50 KW
750 SCFH |
265/200 LB/HR
300/200 LB/HR |
120/90 KG/HR
135/90 KH/HR |
| TL-800
GL-800 |
800 LB
360 KG |
75 KW
1500 SCFH |
395/300 LB/HR
400/270 LB/HR |
180/135 KG/HR
180/120 KG/HR |
| TL-1000
GL-1000 |
1000 LB
450 KG |
75 KW
1500 SCFH |
395/300 LB/HR
500/350 LB/HR |
180/135 KG/HR
225/160 KG/HR |
| TL-1200
GL-1200 |
1200 LB
550 KG |
100 KW
1750 SCFH |
525/400 LB/HR
600/400 LB/HR |
235/180 KG/HR
270/180 KG/HR |
| TL-1500
GL-1500 |
1500 LB
700 KG |
100 KW
2000 SCFH |
525/400 LB/HR
750/500 LB/HR |
235/180 KG/HR
340/225 KG/HR |
| TL-2000
GL-2000 |
2000 LB
900 KG |
125 KW
2500 SCFH |
650/500 LB/HR
1000/665 LB/HR |
290/225 KG/HR
450/300 KG/HR |
| TL-2500
GL-2500 |
2500 LB
1150 KG |
125 KW
2500 SCFH |
650/500 LB/HR
1000/665 LB/HR |
290/225 KG/HR
450/300 KG/HR |
| TL-3000
GL-3000 |
3000 LB
1370 KG |
125 KW
2500 SCFH |
650/500 LB/HR
1000/665 LB/HR |
290/225 KG/HR
450/300 KG/HR |
* Melt rate will vary with type of operation (i.e. tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed, and maximum power.
** Other voltages and power ratings available- consult Malcolm G. Stevens.
GT-Series Model Numbers
High efficiency combustion burner systems represent the leading edge of technology in gas-fired Aluminum melting furnace. The IRI type fuel train includes UL Listed and approved gas pressure switches and dual gas blocking valves, a zero governor proportional control valve, high efficiency burner, fully proportional control valve with drive motor for automatic energy efficient operation, a pilot by-pass system with automatic solenoid valve and long life flame rod. All items are factory installed, pre plumbed, wired and system tested ready for operation.
| GT-Series
Model No. *
Lbs./Al
Capacity |
Electrical Service **3 Phase 60/50 HZ
Volts-Amps |
Natural Gas
Service Min. Conn. Load
15” - 28” W/1.5 S.F. |
Melt Rate Lbs. Hr
*** (KGS/HR)
Aluminum 1300F (700C) |
Approximate
Shipping
Weight Lbs.
(KGS) |
| GT-400 |
240/480
10/5 |
500-SCFH |
130/200 LBS./
HR. (60/90KGS) |
4740 LBS
(2150) |
| GT-600 |
240/480
10/5 |
750-SCFH |
200/300/LBS.
HR.(90/135 KGS) |
5600 LBS
(2540) |
| GT-800 |
240/480
14/7 |
1100-SCFH |
270/400 LBS.
HR. (120/180 KGS) |
6260 LBS
(2840) |
| GT-900 |
240/480
14/7 |
1300-SCFH |
300/450 LBS.
HR.(135/205 KGS) |
6680 LBS
(3030) |
| GT-1000 |
240/480
14/7 |
1500-SCFH |
350/500 LBS.
HR.(160/225/KGS) |
7050 LBS
(3200) |
| GT-1200 |
240/480
18/9 |
1750-SCFH |
400/600 LBS
HR. (180/270 KGS) |
7400 LBS
(3350) |
| GT-1500 |
240/480
18/9 |
2000-SCFH |
500/750 LBS
HR.(300/450 KGS) |
8090 LBS
(3670) |
| GT-2000 |
240/480
18/9 |
2500-SCFH |
665/1000 LBS.
HR. (300/450 KGS) |
11500 LBS
(5220) |
| GT-3000 |
240/480
18/9 |
2500-SCFH |
850/1250 LBS
HR. (385/570 KGS) |
17500 LBS
(7955) |
* Model Number Equals Capacity in Pounds of Aluminum.
** Most furnaces available for operation with single phase 120 volt or 240 volt service and three phase 380 volt and 575 volt 50 Hertz service-consult Malcolm G. Stevens for details.
*** melt rate will vary with type of operation (i.e. Tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed and maximum power.
GS-Series Model Numbers
High efficiency combustion burner systems, IRI type fuel train includes UL listed and approved gas pressure switches, dual gas blocking valves, a zero governor proportional control valve, high efficiency burner, fully proportional control valve with drive motor for automatic energy efficient operation, a pilot by-pass system with automatic solenoid valve and long life flame rod, pre-plumbed and wired, shipped ready for operation. For more information please call Malcolm G. Stevens, Inc. Today
| GS-Series
Model No. *
Lbs./Al
Capacity |
Electrical Service **3 Phase 60/50 HZ
Volts-Amps |
Natural Gas
Service Min. Conn. Load
15” - 28” W/1.5 S.F. |
Melt Rate Lbs. Hr
*** (KGS/HR)
Aluminum 1300F (700C) |
Approximate
Shipping
Weight Lbs.
(KGS) |
| GS-300 |
240/480
10/5 |
500-SCFH |
100/150 LBS./
HR. (45/68 KGS) |
3140 LBS
(1425) |
| GS-500 |
240/480
10/5 |
750-SCFH |
175/250 LBS.
HR.(80/113 KGS) |
3635 LBS
(1650) |
| GS-700 |
240/480
14/7 |
1000-SCFH |
240/350 LBS.
HR. (110/160 KGS) |
4320 LBS
(1960) |
| GS-900 |
240/480
14/7 |
1300-SCFH |
300/450 LBS.
HR.(135/205 KGS) |
4560 LBS
(2070) |
| GS-1000 |
240/480
14/7 |
1500-SCFH |
350/500 LBS.
HR.(160/225/KGS) |
4660 LBS
(2115) |
| GS-1500 |
240/480
18/9 |
2000-SCFH |
500/750 LBS
HR. (225/340 KGS) |
5410 LBS
(2450) |
| GT-2000 |
240/480
18/9 |
2500-SCFH |
665/1000 LBS.
HR. (300/450 KGS) |
6190 LBS
(2810) |
* Model Number Equals Capacity in Pounds of Aluminum.
** Most furnaces available for operation with single phase 120 volt or 240 volt service and three phase 380 volt and 575 volt 50 Hertz service-consult Malcolm G. Stevens for details.
*** melt rate will vary with type of operation (i.e. Tap and charge or batch melt) melt rates assume hot furnace, clean crucible, dense charge, lid closed and maximum power.
