Malcolm G. Stevens, Inc. is the supplier for all your tooling needs. Grinders for heavy material removal, sanders, percussion, saws, routers, motors and drills. We also have molders tools, abrasive discs and pads in various sizes and grit. Sand paper, in various sizes. We couldn’t possibly list all our inventory, so if you haven’t found what you are looking for contact us. About 90% of the orders we receive today will be shipped same day.
American made tools
Designed for user efficiency
Made in compliance with OSHA & ANSI compliance
Provide complete repair services
Cast Iron Ingot Mold for Aluminum & Bronze
Sizes Available:
27”X5” X 4 (for Aluminum)
10” X 3” X 2.5” (for Bronze).
Also Available:
Aluminum Notch Bar Ingot Molds
Alloyed Iron Aluminum Molds
Cast Iron or Ductile Iron Aluminum Sow Molds.
Stainless Steel Molders Tools
All molders tools can be specified to meet your needs or all sizes below are available:
# 10 Square Trowel 1 1/4 X 5, 1 1/2 X 6, 2 X 7
# 12 Slick & Oval Spoon 3/4, 1, 1/4, 1 1/2
# 18 Slick & Square Spoon 3/4 ,1, 1/4, 1 1/2
# 80 Lifter 3/4-14, 1/2-16, 3/4-18, 1-20
# 90 Square & Square Spoon 3/4, 1, 11/4, 1 1/2
# 20 Finishing Trowel 1 1/4 X 5, 1 1/4X 6, 1 1/2X6, 1 1/2X 7, 2 X 7
# 24 Spoon & Gate Cutter 1, 1 1/4, 1 1/2
# 13 Slick & Taper 1”
# 19 Slick & Square 3/4, 1, 1/4, 1 1/2
# 85 Bench Lifter 1/2, 3/4, 1
The following are available in 1” only:
# 32 Taper & Spoon
# 38 Taper Square & Spoon
# 39 Taper & Square,
# 72 Heart & Spoon
# 73 Heart & Taper
GXR-A Blow Gun
Functional safety ports are designed to aspirate, increasing the discharge volume by drawing in ambient air. Gun is lightweight for operating comfort, and corrosion resistant.
Inquire about the 12” and 25” nylon recoil hoses for the blow guns and air operated tools also.
Dynaswivels never struggle with an air hose again. The Dynaswivel is a universal joint that connects portable air tools to an air line. It swivels 360º at tow locations allowing an air hose to drop straight to the floor no matter how you hold the tool. This joint has male pipe threads that screws directly into most air tools and accepts male pipe thread hose fittings or standard quick change adapters.
Sizes available:
# 95460, 1/4 NPT Thread up to 25 CFM air flow range
# 95461, 3/8 NPT thread up to 26-45 CFM air flow range
# 95462, 1/2 NPT thread up 46-65 CFM air flow range.
Rayon Vent (Vent Rope)
As cold setting processes become more and more important in the foundry, the need for an adequate method of core venting become obvious. Nearly all of the worldwide foundries are using flexible core vents.
The result are a better product, less rejects and a shorter finishing time. Get better and cleaner castings. Rayon vents have some distinct advantages.
Allow unrestricted use of cold setting process
Disintegrate without leaving residues.
No sealing produced around core vents.
Do not reduce permeability of core.
Reduce porosity in castings.
Shorten finishing time.
Fewer rejects occur.
Unaffected by temperature changes
while being stored.
Sizes
Diameter
Length
# 2
3/32
100 Meter Hank
# 3
1/8
100 Meter Hank
# 4
5/32
100 Meter Hank
# 5
3/16
50 Meter Hank
# 5
3/16
100 Meter Hank
# 6
1/4
50 Meter Hand
# 7
9/32
50 Meter Hank
# 8
5/16
50 Meter Hank
# 9
3/8
50 Meter Hank
# 10
25/64
50 Meter Hank
# 12
1/2
25 Meter Hank
# 20
3/4
25 Meter Hank
# 25
1”
25 Meter Han
Permoplast Molding Clay
Permoplast Molding Clay is a non-toxic modeling clay, which is sold in 5 lb Boxes (twenty 1/4 lb sticks).
Since 1919, Permoplast has remained the standard for premium, non hardening modeling clay. Its superior formula is easy to work with, stays soft and pliable when stored in a plastic bag, and can be used over and over.
# 90078F, X -30 Cream colored modeling clay is a stock item in Tyngsboro, MA. And can be shipped U.P.S. Upon receipt of order.
Flask & Bushings
Flask Pins & Bushings Standard & custom machined, range up to 4-1.4: diameter in rounds-up to 3” in hex. Standard steel Flask pins, hook loose pins, self centering loose pins, hardened closing pins, round & elongated bushings, threaded hexagon or square flask & pattern plate pins.
All Flask pins are made from high quality cold finished steel which normally runs. 001” ti .002” undersized. Threaded pins are furnished complete with nut.
When standard sizes are not suitable for your needs, simply submit your requirements (print or samples) and our manufacturer will make according to your specifications.
Cast Iron Tap Out Cones ( Cast Iron Stopper)
Stops the flow of molten metal at the furnace tap hole. Non Ferrous applications.
# 9001C.I. Cone, (drilled & tapped) 2 1/2 B.O.D X 6 1/2 H X 3/4 Nose
Style “A” C.I. Cone ,(drilled & tapped) 3” B.O.D. X 8 1/2 H X 1 Nose
Tungsten Carbide Core Files
8” X 1/2 “ X 1/16” FLAT
8” X 1/2” X 1/8” FLAT
8” X 1/4” X 1/16” FLAT
8 x 1/8 “ ROUND
12” X 1” X 1/8” FLAT
Files are sold in 2 price brackets. 1 to 23 pieces or 24 pieces and up. Sizes may be combined for max bracket pricing.
Vibrators - Turbine & Piston
Air Piston (Pneumatic) Vibrator
Single impacters
Miniature air piston vibrators
Lubrication free coated air pistons Vibrator
Ball Vibrators
Rotary electric vibrator
Mounting vibrators
Several brands of vibrators in stock. The following accessories are also available:
Connectors
Filters, Regulators & Lubricants
Hoses & Fittings
Mounting channels
Rail car brackets
Values
Please call today so we may assist you in finding the correct type of vibrator you are looking for.
Stirring Rods
Malcolm G. Stevens, Inc. maintains a substantial inventory of standard carbon and graphite rods and blocks. Available in standard sizes and , we offer custom cut sizes and can supply graphite and carbon to your specifications.
NAC-200 CARBON RODS
Description - Extruded and Baked Carbon Rods – Fine Grain
Grain Size - .008
Diameters - 1/8" to 5 1/2"
Lengths - 12"/24"/48" NAC-500 GRAPHITE RODS
Description - Extruded Graphite Rods – Fine Grain, High Density
Grain Size - .008
Diameters - 1/8" to 6"
Lengths - 12"/24"/48" NAC-673 GRAPHITE RODS
Description - Extruded Graphite Rods – Medium Grain, High Density
Grain Size - .030
Diameters - 2" to 6"
Lengths - 48" NAC-673 GRAPHITE BLOCKS
Molded Graphite Blocks – Medium Grain, High Density
Grain Size - .030
Widths – up to 16"
Heights – up to 32"
Lengths – up to 100"